Skip to main content

Replies sorted oldest to newest

John:

Some quick notes for you, I downloaded the op manual, here's what I found:

  • User must replace all drums, waste toner unit,and fuser. Xerox calls then CRU's (Customer Replacable Units)
  • No Scan2url
  • Color output at 35ppm, black @ 45ppm
  • No Doc Server
  • 75 Page Doc Feeder
  • 8 inch color screen
  • max copy res 600x600
  • When replacing paper, user must always confirm via touch panel for paper sizes

    In order to make a copy, the manual states these procedures:

  • Select Clear All
  • Select All Services
  • Select Copy icon
  • Select copy features
  • Press Start

    Seems rather cumbersome to me, plus the fact that users have to install drums, and fusers (ouch), plus guss with waste toner bottles!

    Couple of cool features:

  • print from USB thumb drive, and media card
  • v-fold

    It's late and that was some of things that popped out at me! I suggest to download the manuals from the Xerox site and give them a good going over and I'll be you'll uncover alot more.

    Over and Out!
  • quote:
    Originally posted by Art Post:
    John:

    Some quick notes for you, I downloaded the op manual, here's what I found:

  • User must replace all drums, waste toner unit,and fuser. Xerox calls then CRU's (Customer Replacable Units)
  • No Scan2url
  • Color output at 35ppm, black @ 45ppm
  • No Doc Server
  • 75 Page Doc Feeder
  • 8 inch color screen
  • max copy res 600x600
  • When replacing paper, user must always confirm via touch panel for paper sizes

    In order to make a copy, the manual states these procedures:

  • Select Clear All
  • Select All Services
  • Select Copy icon
  • Select copy features
  • Press Start

    Seems rather cumbersome to me, plus the fact that users have to install drums, and fusers (ouch), plus guss with waste toner bottles!

    Couple of cool features:

  • print from USB thumb drive, and media card
  • v-fold

    It's late and that was some of things that popped out at me! I suggest to download the manuals from the Xerox site and give them a good going over and I'll be you'll uncover alot more.

    Over and Out!


  • Speaking from an engineering side and normally speaking to the actual operators many like the option to change units themselves. Many also like the option in the case of where an engineer is delayed or saving time waiting for the engineer to return and fit parts.

    If they don't, they like the speed it takes for an enineer to come in and replace all the units and the machine up and running asap.

    You can see this was going to happen with the mpc45000 due to the way all the units are so easy to take out and fit. With just bodged up screws to hold in the waste toner etc.

    So i guess sometimes its a plus and other times a minus.

    Add Reply

    Post
    ×
    ×
    ×
    ×
    Link copied to your clipboard.
    ×
    ×