Below is an email from one of my clients. My service department is telling me this is a limitation of the WEB PRINT TOOL. Can anyone help!
Gents,
We ran in to another issue last week. Using the web printing tool, we send a set of PDFs to the plotter set to print at 1/2 size. We changed the settings per below.
The full size set was 42”x30”. The actual drawings printed ½ size, but the sheet cut at the original sheet size of 42”x30” still making for significant waste.
The old plotter automatically cut the sheet at the end of the drawing to the smaller size when we plotted reduced size sets.
What setting do we need to change to make sure this happens with the new plotter; anything to do with the Synchro cut in this interface or a setting with the main plotter interface?
Thank you.