Previously, we created 2 custom sizes for a customer (36x100 and 24x100). Both of these are longer than the customer will ever need but we created these due to the fact that all their drawings are different lengths and you could not create a custom driver for each. When they print to the W2400, the DIMM chip is set so that the printer will only print the "inked" area which is what we want it to do. The problem is that if you select the 24x100 customer size and there is no 24" paper in the machine, the file will not print. With the external Ratio controller, you can set parameters that will allow the machine to print on whatever size is available. Any idea if the Embedded Printer can do this?
Original Post