Service Call 0-71H appears on the display I need help to solve this problem.
Thks,
RAD
Original Post
Replies sorted oldest to newest
Go into servvice mode to get the real error code + sub code.
Function 6, 1995 yes.
Right arrow to Error code display. post the code(s).
9-22 is fuser errors and the sub code tells you where in the fuser section the problem lies.
Lots of problems with this machine with the push style switch for the clam shell.
Edit: I dont mean "real" code. Its just that that is in hex code and I only have A fingers.
Function 6, 1995 yes.
Right arrow to Error code display. post the code(s).
9-22 is fuser errors and the sub code tells you where in the fuser section the problem lies.
Lots of problems with this machine with the push style switch for the clam shell.
Edit: I dont mean "real" code. Its just that that is in hex code and I only have A fingers.
The more common 71 code is 7-71h, which is a problem with scanner movement.In this case remove the adf and platen glass to access the scanner rod and clean it with alcohol.Do not lube it. As for fuser codes 0-05h and 0-07h are common.Check the door interlock switch and then the thermostat.