Q & A for Minolta Di3510f

Question
What is required to enable the scanning capabilities of the SU-2 Network Scan Kit or SU-3 Internet Fax/Network Scan Kit for the Di3510-2010 series?

Answer
At time of launch, the SU-2 Network Scan Kit and the SU-3 Internet Fax/Network Scan Kit require the Pi3505e PCL Print Controller (or Pi3505e PS3+PCL Controller when it becomes available) AND the NC-4 Network Printer Kit.

Question
What types of scanning are available with the SU-3 Internet Fax/Network Scan Kit on the Di3510-2010 series?

Answer
Scan-to-E-mail, FTP, URL and Hard Disk Drive (HDD) plus IP Scanner and Internet Faxing.

Question
What is the scan-to-URL function available on the SU-2 and SU-3 for the Di3510-2010 series?

Answer
Scan-to-URL sends a notification that a file has been scanned to an FTP site and ready to be downloaded at your convenience.

Question
Will the HDD support forms storage on the Di3510-2010 series?

Answer
No.

Question
Can any combination of all the available FN-117 Finisher options be added to the base finisher in the Di3510-2010 series?

Answer
The only two options that CANNOT be combined are the MK-1 Mailbin Kit and the SK-1 Saddle Kit option.

What type of printing is available with the Pi3505e PS3 + PCL Print Controller for the Di3510-2010 series?

Answer
PostScript Level 3, PCL5e and PCL6

Question
What is a MIB?

Answer
MIB stands for Management Information Base. PageScope Net Care can monitor all networked output devices that comply with this printer-MIB standard.

Question
What types of finishing are available with the Di3510-2010 series?

Answer
Single position stapling; corner stapling, 2-position stapling at side.

Saddle Stitch Stapling, Center Creasing

Selectable 2-hole or 3-hole punching

Question
What types of scanning are provided by the SU-2 Network Fax Unit on the Di3510-2010 series?

Answer
Scan-to-E-mail, FTP, URL and Hard Disk Drive (HDD)

Question
Is it possible to select from multiple trays for print output from the Pi3505e Print Driver?

Answer
Yes. Mixed paper sizes will be printed on the correct paper size based on the selections made, provided the paper sizes required are loaded in the paper trays. If the selection on the driver has been set to Auto Paper, the correct paper sizes will automatically be selected. If specific paper type is required, you must select it from Driver.

Question
Which Di3510-2010 series models are compatible with the SU-3 Internet Fax and IP Scanner accessory?

Answer
The SU-3 is compatible with all eight products in the Di3510-2010 series, both printer/copier/fax versions (Di3510f, Di3010f, Di2510f, Di2010f) and printer/copier versions (Di3510, Di3010, Di2510, Di2010).

Question
What models in the Di3510-2010 series offer standard duplexing?

Answer
The Di2510/f, Di3010/f and Di3510/f.

Question
What is the FN-117 finisher capability for the Di3510-2010 series?

Answer
It’s 1,200 sheets.

Question
Do the Di3510-2010 series products support face up and face down output?

Answer
The Di3510-2010 series support Face Down output only.

Question
Are envelopes supported by the Di3510-2010 series?

Answer
Yes, up to ten #10 envelopes based on manufacturer recommended specifications.

Question
What file formats are supported by the SU-2 and SU-3 for the Di3510-2010 series?

Answer
TIFF and PDF File Formats

Question
Is it possible to staple mixed originals in the left corner on the Di3510-2010 series?

Answer
No.

Question
What is the function of PK-6 that is available on the Di3510-2010 series?

Answer
It is the Di3510-2010 Punch Kit. It offers 2-hole AND 3-hole punch.

Question
What is the JS-203 and what function does it serve for the Di3510-2010 series?

Answer
The JS-203 is a Job Separator Tray. Its function is to separate prints, copy and fax output.