Q & A for Minolta Di3510f

Question
What is required to enable the scanning capabilities of the SU-2 Network Scan Kit or SU-3 Internet Fax/Network Scan Kit for the Di3510-2010 series?

Answer
At time of launch, the SU-2 Network Scan Kit and the SU-3 Internet Fax/Network Scan Kit require the Pi3505e PCL Print Controller (or Pi3505e PS3+PCL Controller when it becomes available) AND the NC-4 Network Printer Kit.

Question
What types of scanning are available with the SU-3 Internet Fax/Network Scan Kit on the Di3510-2010 series?

Answer
Scan-to-E-mail, FTP, URL and Hard Disk Drive (HDD) plus IP Scanner and Internet Faxing.

Question
What is the scan-to-URL function available on the SU-2 and SU-3 for the Di3510-2010 series?

Answer
Scan-to-URL sends a notification that a file has been scanned to an FTP site and ready to be downloaded at your convenience.

Question
Will the HDD support forms storage on the Di3510-2010 series?

Answer
No.

Question
Can any combination of all the available FN-117 Finisher options be added to the base finisher in the Di3510-2010 series?

Answer
The only two options that CANNOT be combined are the MK-1 Mailbin Kit and the SK-1 Saddle Kit option.

What type of printing is available with the Pi3505e PS3 + PCL Print Controller for the Di3510-2010 series?

Answer
PostScript Level 3, PCL5e and PCL6

Question
What is a MIB?

Answer
MIB stands for Management Information Base. PageScope Net Care can monitor all networked output devices that comply with this printer-MIB standard.

Question
What types of finishing are available with the Di3510-2010 series?

Answer
Single position stapling; corner stapling, 2-position stapling at side.

Saddle Stitch Stapling, Center Creasing

Selectable 2-hole or 3-hole punching

Question
What types of scanning are provided by the SU-2 Network Fax Unit on the Di3510-2010 series?

Answer
Scan-to-E-mail, FTP, URL and Hard Disk Drive (HDD)

Question
Is it possible to select from multiple trays for print output from the Pi3505e Print Driver?

Answer
Yes. Mixed paper sizes will be printed on the correct paper size based on the selections made, provided the paper sizes required are loaded in the paper trays. If the selection on the driver has been set to Auto Paper, the correct paper sizes will automatically be selected. If specific paper type is required, you must select it from Driver.

Question
Which Di3510-2010 series models are compatible with the SU-3 Internet Fax and IP Scanner accessory?

Answer
The SU-3 is compatible with all eight products in the Di3510-2010 series, both printer/copier/fax versions (Di3510f, Di3010f, Di2510f, Di2010f) and printer/copier versions (Di3510, Di3010, Di2510, Di2010).

Question
What models in the Di3510-2010 series offer standard duplexing?

Answer
The Di2510/f, Di3010/f and Di3510/f.

Question
What is the FN-117 finisher capability for the Di3510-2010 series?

Answer
It’s 1,200 sheets.

Question
Do the Di3510-2010 series products support face up and face down output?

Answer
The Di3510-2010 series support Face Down output only.

Question
Are envelopes supported by the Di3510-2010 series?

Answer
Yes, up to ten #10 envelopes based on manufacturer recommended specifications.

Question
What file formats are supported by the SU-2 and SU-3 for the Di3510-2010 series?

Answer
TIFF and PDF File Formats

Question
Is it possible to staple mixed originals in the left corner on the Di3510-2010 series?

Answer
No.

Question
What is the function of PK-6 that is available on the Di3510-2010 series?

Answer
It is the Di3510-2010 Punch Kit. It offers 2-hole AND 3-hole punch.

Question
What is the JS-203 and what function does it serve for the Di3510-2010 series?

Answer
The JS-203 is a Job Separator Tray. Its function is to separate prints, copy and fax output.

What is the AK-1 Additional Bin Kit for the Di3510-2010 series?

Answer
The AK-1 Additional Bin Kit adds a third tray to the FN-117 base finisher. It allows users to separate print, copy and fax output. It is recommended for the Di3510-2010 fax versions.

Question
Is it possible to perform a remote reprint (i.e from PageScope Light) on the Di3510-2010 series?

Answer
The reprint function must be accessed from the device.

Question
What is the maximum size document that you can send or receive on a Di3510-2010 series fax version?

Answer
Up to 11” x 17” (ledger-size)

Question
What is the purpose of the Accessibility Key on the Di3510-2010 series?

Answer
The Accessibility Key enables the user to customize settings such as the look, feel and sound of the display to suit their needs. It also allows users to set the amount of time that a notification or confirmation screen remains on the LCD.

Question
On the Di3510-2010 series, how many one-touch keys are available for programming IP addresses using the IP Scanner utility available with the SU-3?

Answer
All 540 keys available on the Di3510-2010 devices (printer/copier as well as printer/copier/fax versions) can be used to program IP addresses.

Question
With the Di3510-2010 series, is it possible to scan a document that is greater than 80 pages as a single file?

Answer
No, it is not. Since the AFR-19 can handle a maximum number of 80 sheets, any pages that exceed this limit will be scanned as a separate file. It is not possible to combine two independent scan jobs into one scan file.

Question
On the Di3510-2010 series, is it possible to perform an IP scan via WAN or it is limited to a LAN?

Answer
The IP Scanner function available with the SU-3 was designed to work in a LAN environment.

Question
When a document is scanned at 200 x 200 dpi resolution on the Di3510-2010 series, what is the AFR-19 scan speed?

Answer
At 200 x 200 dpi, the AFR-19 can scan at 70 originals per minute. The AFR-19 also scans at 70 originals per minute when 200 x 100 dpi resolution is selected.

Question
On the Di3510-2010 series, what advantages does scanning using the IP Scan function offer?

Answer
IP Scanner enables the user to scan to the desktop. With this type of scanning, setting up an e-mail server is not required. The scan goes directly to the desktop in a designated folder for retrieval at any time. It’s a one step scan process if the application requires an electronic form of the document to be archived on the desktop. There are up to 540 autodialing keys on the Di3510-2010 series, printer/copier versions and printer/copier/fax versions, that can be used for scanning addresses. If required, all 540 autodialing keys can be set up for IP Scanning.

Question
On the Di3510-2010 series, what protocol is used by the IP Scan Function protocol?

Answer
The IP Scan Function uses the SMTP protocol.

Question
On the Di3510-2010 series, what is the function of the 128MB memory available with the PS3+PCL Print Controller?

Answer
The 128 MB Print Controller Memory is used for “drawing” the image/information on the page. After this process is completed, the bitmap data of the image is transferred to system memory and then downloaded to file memory.

Question
On the Di3510-2010 series, is it possible to select crease fold without selecting 2-point staple when using the SK-1 Saddle Kit?

Answer
Yes, it is possible to crease fold a document without selecting 2-point staple. The output will be a creased document with no stapling. This is possible with one sheet of paper (4-page booklet).

Question
On the Di3510-2010 series, can the FN-117 offset stack?

Answer
Yes, the FN-117 can offset stack all supported paper sizes (letter, legal, ledger).

Question
On the Di3510-2010 series, what advantages does scanning to the Hard Drive offer?

Answer
Scanning to the hard driver presents an alternative form of scanning for the end user. In many cases, users do not want to integrate scanning with their e-mail server. Scan to Hard Disk Drive eliminates the need to set up an e-mail server. Documents are scanned to a “mailbox” and then retrieved by the user when they are needed.

Question
On the Di3510-2010 series, what functions does the HDD-6 Hard Disk Drive impact on the Di3510-2010 series?

Answer
The HDD-6 impacts printing, scanning and copy functions. From a printing perspective, the HDD spools print jobs, supports PostScript 3 Font Downloads as well as PDL file downloads with the PostScript Level + PCL Print Controller and is required when creating booklets with (SK-1 Saddle Kit) with the Pi3505e PostScript 3 + PCL Print Controller.

From a scanning perspective, the HDD-6 is required for scan-to-Hard Drive function to work. There is also a scan-to-URL that sends a notification that a document has been stored in a mailbox (Hard Disk Drive).

In terms of copying, the HDD-6 impacts Image Stamping, Job Reservation and provides an additional 2,000 pages of file memory. The HDD-6 is required to scan multiple copy jobs (up to five).

Question
On the Di3510-2010 series, when the "A4 Overwrite <-> Letter" function is initiated, is the A4 document automatically scaled down to fit on letter size paper?

Answer
The image on the A4 size document is not reduced. It is reproduced to scale on letter size paper. Therefore if an image on an A4 size document is edge to edge in both directions, the image will be cut off when it is printed on letter-size paper.

Question
On the Di3510-2010 series, what is the maximum paper weight that can be stapled using the SK-1 Saddle Kit?

Answer
The SK-1 Saddle Kit can staple up to 15 sheets with paper weighing 16lbs. to 24lbs. paper.

Question
On the Di3510-2010 series, is it possible to select cover insertion to be used with crease fold and saddle stitch to create booklets with covers via the SK-1 Saddle Kit?

Answer
When booklet with crease fold and two-point staple is selected, cover insertion is not available.

Question
On the Di3510-2010 series, is the HDD-6 Hard Disk Drive necessary to perform Copy Reservation, the function that will allow me to scan up to 5 copy jobs?

Answer
In order to scan multiple copy jobs (up to 5) while the device is printing the copy jobs already scanned, the HDD-6 is absolutely required.

Question
On the Di3510-2010 series, is it possible to hole punch booklets that are created via the SK-1 Saddle Kit so that they can be placed in binders?

Answer
No, it is not possible to hole punch (2- or 3-hole) booklets created the via the SK-1 Saddle Kit. Only two-point staple and crease fold are available as finishing options via the SK-1.