print errors

That is typical among all printers, the job must then be cleared at the printer. We have seen the problem many times with incorrect paper sizes

It’s usually because, special paper or letter head has been selected from the wrong tray or not labeled correctly.

Or Letterhead or other special paper has been set in the MFP but NOT selected in the print driver.
(Oh, she said, Nobody ever told me that)

Do you setup ACCESORIES after the install driver, setup TRAY size , the driver must be correct for each MFP.
then setup PRINTER PREFERENCES, and the tab PAGE must be setup correct size paper.
That is all
angeles3d@hotmail.com

Go into Printer Features>System>Sub Paper Size and set to either On or Auto. This means when paper size mismatch occurs (A4/LT) then macine will automatically output without throwing an error.

This is better than setting papers sizes in application because if someone sends you a file with the wrong paper size it still won't print. It will if you set Sub Paper Size.

Also if you set Auto Continue to a specified time the job which has an error will clear and one set printed. Any other jobs then behind it will print.

Copier doc- under those circumstances, if the size is mismatched, which size or tray will the print be pulled from?

Sorry for the late reply.

It will pull paper from the first available tray, or the one specified in User Tools as the printer default tray.

Under your scenario, if I print something that needs letterhead and forget to load letterhead before I print my job will simply print out on plain paper? Same for Plain Paper if it runs out of plain and there is only letterhead in the trays? same for Colored Paper? Glossy Stock?

The only way this works out for good is if the user is an idiot and keeps setting the wrong paper type when he means to print "plain paper".