Skip to main content

Hey guys

I am having a problem setting up a MP161SPF for scan to folder!

First off the machine is able to print, copy, fax and lanfax as well as scan to mail!!

The problem arises when I try to set up scan to folder using, either a pc name and or the IP, it keeps telling me that the connection has failed, IP Add is correct, Subnet is Correct, Gateway is correct. And the customers IP`s are all static. I tried connecting to my laptop as well with the same connection error, so I am pretty sure the problem lies with the machine!

I have checked everything and the machine is new, ie everything is default.

Anyone got any ideas...

Thanks

Warren
Original Post

Replies sorted oldest to newest

Make sure WINS Server is turned off unless the customer has a WINS Server. Ricoh "out-of-the-box" have WINS ENABLED with the IP ADDRESS of 0.0.0.0.
I have seen this to cause a DNS issue when trying to resolve names to IP address for PC on the network. Also, you MUST set the SMB Domain/workgroup correctly or it will not find any PC's on the LAN. The default SMB workgroup/domain name programmed in the MP161 is WORKGROUP. If that is not the customers workgroup/domain name then you WILL get that error.
You change this setting in the web device monitor on the MFP. Under the network settings catagory. I hope that helps. SLIM463 Smile

PS... don't for get about the DNS settings as well. If not correct, NO Names will resolve the actual ip address.

Add Reply

Post
×
×
×
×
Link copied to your clipboard.
×
×