Skip to main content


The KIP 3000 is the eagerly awaited low end blockbuster from the boys from Novi (as in Michigan home office.) It is targeted directly at the Ricoh FW 240 (in all of its Laniar, Gastetner, Savin iterations) and the Oce? TDS 300. While the 3000 comes in six different configurations it only has one flavor. The beauty of this machine is that whether you order it as a bottom of the line; one roll copier or the top of the line, two roll system with copier, plot and scan to file feature enabled, you are delivered the same box, the dealer then turns on various features and charges accordingly.



The KIP 3000 is a one or two roll system that operates at four ?D? size prints per minute using KIP?s exclusive HDP Plus (High Definition Print) Technology. The new touch screen user interface is intuitive and will ultimately transfer across all of the KIP family of printing platforms. Installation and network connectivity is straight forward and to the point. Copy quality is excellent.



The realistic operating range for this copier is in the 3,500 to 5,000 square feet per month bracket. Anyone who tells you that this or any other machine in its class will perform in the 10,000 square feet per month category, all day, every day, for the three year estimated life of a machine in this class, more than likely, still has a positive opinion on the existence of the tooth fairy.

Configuration
Console ? Single Footprint

Printing Method
LED Array Electro-Photography

Photoreceptor
Organic Photoconductive Drum

Print Speed
60mm per second (4 ?D? per minute

Resolution
600 x 600 dpi

Maximum Number of Originals for Set Copy
1 - 200

Maximum Number of Copies
999

Maximum Print Width
36?

Minimum Print Width
8.5?

Maximum Print Length
11.75?

Minimum Print Length
8.5?

Media Capacity
1 or 2 rolls plus manual cut sheet bypass

Reduction and Enlargment %
25 to 400% in 0.1% increments

Warm Up Time
Less than 5 minutes

First Print time
24 seconds

Fusing Method
Heat ? pressure rollers

Development method
Dry, non-magnetic mono-component Toner

Supported Vector Formats
HPGL 1 and 2, HP-RTL, Calcomp 906, 907, VCGL

Support for Raster File Formats
TIFF, Cals Group 4, Intergraph CIT/TG4. Grayscale TIF, Color TIF, PNG, JPEG, PCX

AutoCAD Drivers
Auto CAD 2000, 2001, 2002, 2004, 2005/6

Network Protocal Compatibility
TCP/IP, lpr/lpd

Input Power
120V + 6% or ? 10% 50/60 Hz, 15A

Maximum Power Consumption
1.5KW

Acoustic Noise
Idle - Max 52db

Printing ? Max 60db

Impulse Sound ? Max 65db

Ozone
Max 0.1 ppm

Dimensions
49? W x 24? D x 44? H

Media
Plain paper - US Bond 20 lb

Tracing paper US Vellum 20 lb

Film - 4mil

Environmental Rating
Energy Star Compliant
Original Post

Add Reply

Post
×
×
×
×
Link copied to your clipboard.
×
×