I need to get a meter reading on a 4500 that is too far away to go see and the customer can't find the meter. We don't have one except this one in the field so I'm stuck.
Can someone out there tell me where the meter is?
Original Post
Replies sorted oldest to newest
Go to menu and print the config page and have them fax it to you.
Vince, Jim is talking about a JP4500 not the AP4500, good try though! 
you can find it under user tools system menu #2 R. counter diplay it will give you masters and prints it is on page 72 of the operators manual 
The trouble with using user tools, is that it's a resettable counter, and thus would not be good to use, as it can be reset! Tech Sp mode under CopyData keeps ongoing, but is not customer accessible. Mechanical counters are inside front cover, to the left of the drum, covered by a plastic label type thing. Suggest that that label is pulled off on set-up, to allow counter readings.
Cheers.
Cheers.
Stop the presses... Late breaking news. Electronic counters for this unit are accessed by pressing and holding the enter (#) key for more than 3 seconds. Reason: due to resistance from new customers commenting on the mechanical counters reading before 0. Action: suggest putting the stickers back on..........
No wurries.