Aficio cl1000n

Specify the direction in the application. i.e. Word.

Use the PCL driver.

I would agree with Jomama. Change within Application.

I also tried to change it within word. When i went in to set-up the envelope section. If you were talking about something else could you let me know where and what you mean by set it up in the application.

Thanks

I am using Word 97 but it is in Tools> Envelope and lables> Options>Then there are two tabs one is print options and the other is envelop options. In the first you specify the type and the 2nd you can specify the direction of feed. mke sure it matches the direction specified in the machine manual.
good luck.

Ok I tried that and it still didnt work. When i use the postscript driver it prints in the right direction but it is off. So i can change the settings of where it puts it on the page to make it correct, which i shouldnt have to do but when i use the rpcs driver it is in the wrong place completely and it is also in the wrong direction on the paper. Anyone have any suggestions or solutions. If you have it working on your machine could you let me know what all of the settings are also.

Thanks

Nick:

What application are you using to print the envelopes?

Art

I am using Microsoft Word.

Try to transfer the file to print to other application, retry to print it with rpcs,if you obtain different results, your problem is in the application (word), if the problem´s still there , try reinstall driver

If my thinking is correct, the following should solve your problem:
1. Go to "Properties'
2. Go to "Add/Change Custom Settings"
3. last tab "Misc"
4. "rotate by 180 degrees.

Hope this works