1060 1075 scan to email

You can do it both from the keypad and from a computer. I prefer to use SmartNet Admin.
Install SmartNet Admin
Single click (Select) the 1060/1075 in the window
Look under Tools and Select Email Management
Password is password
Here is where you can add users to the machine. (Not sure of the exact steps since the company won't let me have a 1060 at the house.)
Add a user, select email and you will see the place to put in the password.
When you are finished adding users, upload to the machine and you now have your users programmed. You can program up to 2000 email addresses. This also allows you to upload the same list to multiple machines as well.

Thanks!
Lee

Problem is once you are pasword authenticated you can still use the president as the sender. The password doesn't select the sender. Check this to be sure, but that's how it worked in my demo room two weeks ago.

From what I have seen and done, the password does protect the sender, that is it's main purpose...So you CANT send an e-mail scan of your butt from the president of the company!

Lee,
My boss would let me bring a 1060 to the house to play with but my promblem is that my home office is not large enough to fit in yet!

And don't forget, you would need to change out the plug recepticle to a 20amp plug!

In reply or rather addition to Lee's post, when you are adding names (users/destinations), make sure you back up all the info as a CSV file prior to uploading to the machine. If the machine is in use when you upload, all data will be lost. If you saved it, then you can re-upload when the machine is not in use. (This info was brought to my attention by Graham during and install yesterday. Thanks Graham!)