
Enjoy the threads from ten years ago!
Reply
Re: Customers Recapturing costs
Old Post, but I'll give my 50cents anyway. Can only really talk about equitrac and it is a really good product. You can only really get the best out of it if it is all setup and configured correctly. But if it is, yor employees can't really make a move without the system knowing about it.
Reply
Re: Customers Recapturing costs
Equitrac is good, I have a customer using a few of them with a DSc338. Recently had to find something for a 445 and I think the built in codes (500) will do the trick, printing, faxing and copying. The reports are not automatic but will count per user code and color vs black/white. Also good is PrintAudit @ $75./seat. I considered Printer Cost and Security Manager from Ricoh and while there are plenty of links for new Zealand and europe, there isnt much in usa. Ricoh has one page on it and...
Reply
Re: Copy Connect
Great, now he no sprekens ze Ricohish. Copy connect, connecting two copiers in parallel for print purposes. I think you spend too much time in the ocean.
Reply
Re: Copy Connect
Yes I do, “all work and no play, makes a very dull day. It’s been a long time since we had a copy connect request. Make sure that the “connection PCB” and the “DIMM” are in the CORRECT SLOT on both machines. Firmware on master and slave must be up to date. System-------v3.04.1 install first NCU---------v4.13.3 NetFile-------v3.04.2 BCU---------v4.01.1 LCDC--------v2.09 or later
Reply
Re: Copy Connect
Parallel printing can be set using Smartnet Monitor and RPCS driver. Coping, press the “printer/other function” key and adjust via touch screen.
Topic
FYI - KIP3000
I am currently working on an order for a 240W...... my competition is the KIP 3000. Local dealer has told the customer that the KIP units are on backorder .. 3-6 months. If this is true, push hard, and get those deals. This box is very tough to...
Reply
Re: BEST BUY promo from the Staff @ The Hotel
I probably have the most posts because I am the one that is the most confused. Anyway, I humbly accept your gracious gift realizing all too well that my posts are only a small pittance compared to the massive amount of benefit I gleen from the daily impartations that come from you all. Thank you very much for your kindness and generousity, Jim
Reply
Re: Seri Printer 25 w/VDP from Ricoh
The SeriPrint Drum cabinet enhances productivity by neatly holding the colour cylinders (drums) used by the print engine The convienent height and slide rails make it easy to insert and remove drums from the cabinet. The cabinet has large wheels and sturdy handles making it easy to move out of the way for storage when the system is not in use. Seriprinter Link
Reply
Re: BEST BUY promo from the Staff @ The Hotel
Here, here! I agree with you. Although I do not have many posts (only recently joined), I too receive invaluable information by just looking at the posts. It is also great to know of another resource available to those who seek information. Thank you for all the effort. Allen
Reply
Re: FYI - KIP3000
One deal that I just lost is thinking they are getting thier machine in a month or so. Are you sure with your information? If so, I will go back to the customer. Art
Reply
Re: BEST BUY promo from the Staff @ The Hotel
Thank you all for your continued support! We are going to continue the Best Buy certificate for January 2006. Kee p on posting!!!!!
Reply
Re: FYI - KIP3000
Art, The info came directly from the mouth of the owner of the engineering group. They are a current copier customer of the dealer who told them this. I actually think that if this unit was available, I would have lost already. This box is VERY tough to beat. That is about all I can tell you. I am supposed to hear from the owner today or Monday in regards to an order. Good Luck.
Reply
Re: 240W & 480W w/Ecopy
Here are some more points to hammer home; FPOT 24 seconds warmup 5 minutes Rear exit only, looks the same as the 240W, if thats the case the customer will have continous misfeed problems with long paper No preview of scans No editing of scans Spindle load for paper, KIP outlines 15 steps to replace the paper roll! (ouch), Plus you must have a flat surface available to replace the roll, well that means an empty table or the floor (ouch) Toner replacement, 10 steps to repalce the toner! Plus...
Reply
Re: FYI - KIP3000
Here are some more points to hammer home; FPOT 24 seconds warmup 5 minutes Rear exit only, looks the same as the 240W, if thats the case the customer will have continous misfeed problems with long paper No preview of scans No editing of scans Spindle load for paper, KIP outlines 15 steps to replace the paper roll! (ouch), Plus you must have a flat surface available to replace the roll, well that means an empty table or the floor (ouch) Toner replacement, 10 steps to repalce the toner! Plus...
Reply
Re: FYI - KIP3000
Hi All, Selling the KIP and Ricoh products just want to make sure to correct the record on a couple of things. First, the KIP 3000 does have a preview of the scanning. The preview will be shown right on the touch panel. Second, it is true the bypass must be set up for use. This is a one time task usually done by the technician at the time of installation. After that the user only need select manual feed and then indicate paper size. Lastly, the KIP 3000 does have a clamshell design. I know...
Reply
Re: FYI - KIP3000
JR: I was reading through the operators manual for the KIP and I did not see or the manual was not clear about the clamshell design, nor the pre-scan. However having to set the paper size everytime you use the by-pass can be a real drag. Thanx for correcting my mistakes, that's why we're all here!~ Art Post
Reply
Re: Scanning problem
Try scanning to a laptop using a cross overcable. This will exclude any PC or software of the customers. Or, try reloading or updating “controller” and “scan option” firmware.
Reply
Re: Tracking prints on 3260C
It should be. Make sure you actually have activated print tracking, and make sure "PC control" is off.
Reply
Re: 240W & 480W w/Ecopy
Overall, the Ricoh Response is quite good. There are a couple of answers I would take issue with. Rant: “The software is also very difficult to use and non-intuitive” Reality: Subjectively speaking, it would seem logical that a time tested mature product will be most versatile as well as easy and reliable to operate. Um, have you actually used the software? I agree that anyone who is technically proficient can stumble through it and get what they want in the end. However, it is...
Reply
Re: New HP Color MFP
The toner cost for this beast is .085 based on 5% coverage. Thats almost double the cost of the Aficios. You still need Image transer unit and fuser, will have the full MSRP cpp in a few days. Thanx
-=Good Selling=-
Comments (0)